RCF TTL11A-B 2000W Two-Way Active Column Speaker

It is possible to operate directly on the DSP from the input board through these switches:

• High: (installation height, considering the bottom ofthe TTL11A-B) from 0 to 2 meters, with steps of 0,5 meter.
• Throw: Three possible different throw choices: Near,Mid & Far.
• Delay: From 0 to 10 meters, with step of 0,1 meter.From 10 to 20 meters with step of 1 meter.
• RDNet Ready: The RDNet protocol (optional on TTL11A) represents a perfectblend of reliability and flexibility, in fact it is based on the RS-485communication protocol, which is very stable and allows to send and receivedata on a simple XLR cable in case Ethercon cables are not available.

Features:

• 2x 1000W
• 4 x 8" neo woofers, 2.5" v.c.
• 96 Khz, 32 bit DSP processing
• Digital steering down to -10°
• 1° step steering control
• Beam forming, time delay controls
• The TTL11A represents a state of the art execution ofa DSP controlled multi-way digital amplification.
• XLR input and XLR output for daisy chaining.

Acoustical Specifications:

• Frequency Response -3 dB: 60 Hz ÷ 20 kHz
• Max SPL: 136 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 10° to 40°
• Woofer: 4 x 8" neodymium woofers, 2.5" voice coil 

Input/Output Section:

• Input signal: Balanced/unbalanced
• Input connectors: XLR, RDNet ready
• Output connectors: XLR, RDNet ready
• Input sensitivity: -2 dBu / + 10 dBu

Processor Section:

• Crossover frequencies: 350 Hz - 1300 Hz
• Protections: Thermal , excurs., rms
• Limiter: Soft limiter
• Controls: DSP controlled

Amplifier Specifications:

• Low frequencies: 2 x 1000 W
• Cooling: Convection
• Connections: Powercon in/out

Cabinet:

• Cabinet Material: Baltic birch
• Hardware: Multi-functional
• Handles: 4 on side, Top, Bottom
• Color: Black

Physical Specifications:

• Dimensions: 94.33" H x 10.27" W x 9.52" D (2396 x 261x 242 mm)
• Net Weight: 167.55 lbs (76 kg)