QSC KLA12 12" 500W Powered Line Array

Features:

• 500 W x 500 W power module
• Rugged, ABS enclosure delivers light-weight durability
• SOLO™ Rigging System supports deployment without tools or exteal hardware
• Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
• 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5x KLA12 and 2x KLA181
• 90° x 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
• High power, 12" low frequency driver provides extension down to 44Hz without subwoofers
• Extensive DSP further enhances and protects performance
• 1.75" diaphragm compression driver delivers clear and powerful high-frequency reproduction
• powerCON® Input and Thru connections
• Tilt-Direct™ pole mount assists directivity in single-unit applications

Specifications:

• General Specifications:
  • Configuration: multipurpose 2-way
  • Transducers:
    • HF: 1.75" diaphragm compression driver
    • LF: 12" cone transducer
  • Frequency Response (-6 dB): 49Hz-18kHz
  • Frequency Range (-10 dB): 44Hz-20kHz
  • Nominal Coverage: 90°H x 18°V
  • Maximum SPL (1 meter): 131 dB peak
• Amplifier Specifications:
  • Power Output:
    • HF: 500W Class D continuous
    • LF: 500W Class D continuous
  • Input Impedance (ohms): XLR: 40k balanced/20k unbalanced
  • Controls: Power, Attenuation, LF Setting (Exteal Sub/Normal/Deep™), Array Size (1-5), Front LED (Pwr/Limit/Off)
  • Indicators: Power, Signal, Standby, Limit
  • Connectors: Balanced female XLR line level input, Balanced male XLR full-range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out
  • Cooling: On demand, 50 mm variable speed fan
  • Amplifier Protection: Thermal limiting, output overcurrent, over temperature muting, GuardRail™
  • Transducer Protection: Thermal limiting, excursion limiting
  • AC Power Input: Universal power supply 100 - 240 VAC, 50 - 60 Hz
  • AC Power Consumption (1/8 Power):
    • 100 VAC, 2.3 A
    • 120 VAC, 2.01A
    • 230 VAC, 1.13 A
• Enclosure Specifications:
  • Material: Impact-resistant ABS
  • Grille: Powder coated 18 gauge steel
  • Dimensions: 15" H x 23.4" W x 16.6" D (382 x 594 x 422 mm)
  • Net Weight: 55 lbs (25 kg)